CARDEXPERT TECHNOLOGY, INC.

MIRAGE+ VER. 1.2

Card Type                   Multi-I/O card
Chip Set                    Unidentified
Maximum Onboard Memory      Unidentified
I/O Options                 Floppy drive interface, game port, IDE
                            interface, parallel port, serial ports (2
                            RS-232)
Hard Drives Supported       Two IDE (AT) drives
Floppy Drives Supported     Two 360KB or 720KB drives

Highest Resolution          1024x768
Supported
Data Bus                    VESA local bus
Card Size                   Half-length

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  15-pin analog video         CN1      10-pin serial port 1 -      CN5
  port                                 internal

  25 pin parallel port -      CN2      10-pin serial port 2 -      CN6
  external                             internal

  IDE interface               CN3      16-pin game port -          CN7
                                       internal

  34-pin cable connector      CN4      Feature connector           CN8
  - floppy drive

                        USER CONFIGURABLE SETTINGS

             Function                      Label             Position

  »   IDE enabled                     JP1/Pins 9 & 10          Open

      IDE disabled                    JP1/Pins 9 & 10         Closed

  »   BIOS disabled                   JP3/Pins 5 & 6           Open

      BIOS enabled                    JP3/Pins 5 & 6          Closed

  »   Serial port 1 enabled           JP4/Pins 1 & 2           Open

      Serial port 1 disabled          JP4/Pins 1 & 2          Closed

  »   Serial port 2 enabled           JP4/Pins 5 & 6           Open

      Serial port 2 disabled          JP4/Pins 5 & 6          Closed

  »   IRQ 2 (video) disabled          JP4/Pins 9 & 10          Open

      IRQ 2 (video) enabled           JP4/Pins 9 & 10         Closed

  »   Printer port enabled            JP5/Pins 1 & 2           Open

      Printer port disabled           JP5/Pins 1 & 2          Closed

  »   Floppy drive interface          JP5/Pins 5 & 6           Open
      enabled

      Floppy drive interface          JP5/Pins 5 & 6          Closed
      disabled

  »   Game port enabled               JP5/Pins 9 & 10          Open

      Game port disabled              JP5/Pins 9 & 10         Closed

                        IDE DRIVE TIMING SELECTION

          Active                   Cycle                    JP1

  »           15T                   30T                    Open

              15T                   19T              Pins 5 & 6 closed

              9T                    13T              Pins 3 & 4 closed

              18T                   37T              Pins 3 & 4, 5 & 6
                                                          closed

              10T                   20T              Pins 1 & 2 closed

              10T                   14T              Pins 1 & 2, 5 & 6
                                                          closed

              5T                    9T               Pins 1 & 2, 3 & 4
                                                          closed

              18T                   37T            Pins 1 & 2, 3 & 4, 5 &
                                                         6 closed

                        IDE PORT ADDRESS SELECTION

               Setting                           JP1/Pins 7 & 8

  »                1F0h                               Open

                   170h                              Closed

                    FLOPPY INTERFACE ADDRESS SELECTION

               Setting                           JP5/Pins 7 & 8

  »                3F1h                               Open

                   371h                              Closed

                      PARALLEL PORT ADDRESS SELECTION

                Setting                           JP5/Pins 3 & 4

  »             LPT1 (378h)                            Open

                LPT2 (278h)                           Closed

                      COM 1 & COM 3 ADDRESS SELECTION

                Setting                           JP4/Pins 3 & 4

  »             COM1 (3F8h)                            Open

                COM3 (3E8h)                           Closed

                      COM 2 & COM 4 ADDRESS SELECTION

                Setting                           JP4/Pins 7 & 8

  »             COM2 (2F8h)                            Open

                COM4 (2E8h)                           Closed

                          BIOS ADDRESS SELECTION

                Address                                JP3

  »                C800h                    Pins 1 & 2, 3 & 4 closed

                   CC00h                        Pins 3 & 4 closed

                   D800h                        Pins 1 & 2 closed

                   DC00h                              Open